This narrow web label press with servomotors allows you to swap printing processes and drying / curing methods between all units to get the desired sequence to meet test requirements. This vital R&D tool is also used for flexographic printability testing and the development and industrialization of applications in printed electronics that are produced with multiple printing processes.

• 5 printing stations
• Processes: flexography (5 units), rotogravure (2 units) or rotary screen printing (2 units): one or more processes can be installed inline during a test
• Inks: UV-curable, water-based, solvent based (our press is explosion proof)
• 5 hot air-drying stations, 2 hot air rotogravure ovens, 3 UV lamps
• Print repeat: 406.4 to 610 mm (16 to 24 po, flexo)
• Width: up to 425 mm (16 ¾ po)
• Substrates: paper, cardboard, plastic film, aluminum foil, multi-layer between 12 microns (½ mil, film) and 600 microns (24 pt, board)
• Inline finishing: cutting, lamination, sheeting and slitting
• Speed: 10 to 200 m/min (660 fpm)
• Various types of anilox available (volumes between 2.2 bcm/1120 Lpi and 50 bcm/40 Lpi)
• Flexo plates, print cylinders or rotary screens, adaptable to requirements

For more details, download the technical booklet for our Varyflex press or watch our press in action (french only).

The AniCAM HD is a high-precision 2D and 3D scanning microscope for the printing industry. Operating by non-contact interferometry, the instrument will measure anilox cells to determine line screen (LPI), volume (BCM) and engraving angle. It can measure anilox rolls up to 1500 LPI, as well as gravure cylinders and photopolymer plates.

Various software packages support this instrument for analysis and inventory management of anilox rolls, gravure cylinders and photopolymer plates.

The SAMM USD 800 Flexologic AV mounting table for photopolymer plates is a high-precision automatic reverse mounting machine. This machine delivers perfect register on press.

The plate is placed on the moving table cushion and is held in place by a vacuum system. Patented image recognition software then automatically positions the plate.

The software enables jobs to be saved for quick and easy repetition.

The Flexowash FW 850 system uses state-of-the-art laser technology to thoroughly clean anilox rollers. The laser removes ink particles that clog anilox cells. The particles are then sucked into a filtration system. No consumables are required, only filters to be changed when saturated.

All types of engraving and anilox line screen can be cleaned on this machine. The system options allow to control the laser travel speed and the anilox rotation speed according to the line screen of the anilox to be cleaned.

Here are the capabilities of the anilox cleaning machine for this model;

• Maximum cleanable surface: 700 mm
• Roller diameter: minimum 50 mm – maximum 180 mm
• Maximum weight: 50 kg

• 4 simultaneous duplex printing units
• Heatset or coldset offset inks (without dryers)
• Print repeat: 451 mm (17 ¾ po)
• Substrate Width: up to 635 mm (25 po)
• Paper substrates up to 104 g/m2 (or 70 lbs)
• Folded sheet output
• Automatic registering system
• Speed up to 300 m/min
• Densitometric and spot colour control carried out by IntelliTrax (XRite)

• 5 printing units + 1 coating unit with metering roll (infrared drying)
• Perfector
• Sheet Format: up to 530 x 740 mm (20 x 29 po)
• Substrate Thickness: 0.003 to 0.60 mm
• Max. Speed: 15,000 sheets/h

This versatile press can test both conventional and electronic inks. It has a camera that allows a highly precise positioning of the substrate for overprinting. Thanks to our suppliers, we have access to a wide selection of screens to control the thickness of the ink film and resolution.

• Max. recommended size for the printing area: 304 x 304 mm (12 x 12 po)
• Max. substrate size: 460 x 460 mm (18 x 18 po)
• Substrate: rigid or flexible with a thickness up to 30 mm (1,2 po)[MR1]
• Registration precision: +/- 10 microns
• Inks: solvent based, water-based or UV (offline hot air drying or UV drying)

The impressive 5th colour—white, clear, neon yellow or neon pink toner—offers near unlimited options. This equipment can substrate thicknesses up to 360 g/m² (16 pt) and a size of 13 x 19 po or 13 x 27.5 in in banner format. It features a finishing unit with folding, booklet and one-side cutting in a size up to 11 x 17 in.

Printing on all kinds of flexible substrates (vinyl, fabrics, self-adhesive paper) with latex technology. The Ricoh Pro L5160e Large Format offers hexachromic printing to enrich the colors (CMYK + Orange and Green). The roll can print up to 60 inches wide.